4418 Pack Saddle Pass
Austin, TX 78745
512-447-8888 Voice
512-447-8895 Fax
Sales@Twobits.com
FIXIT module
- A small module which plugs in to the J5 pin header strip along the top edge of any Bally or Stern pinball Main Processor Unit circuit board.
- Functions as the GAME ROMs, the 6810 Static RAM and the battery backed 5101 RAM for the main board so those sockets remain empty.
- Onboard reset circuit to delay and drive the power-on-reset circuit of the main board. You can remove transistors Q1 & Q5 from your MPU; they are no longer required.
- The GAMEROM contains all known Bally and Stern pinball machines. Choose your game with the dip switch.
- It allows ANY game to play on ANY board, even play MPU-200 games on your dash 17 board.
- If all the dip switches are turned OFF, it chooses the diagnostic program that was provided on TWOBITS BALLY / STERN TEST FIXTURE allowing you to troubleshoot MPU boards and use a good MPU to diagnose other problems in your cabinet.
- Also order a switch matrix board and harness which, along with the TESTER module made up the original BALLY STERN TEST FIXTURE.
The FIXIT module:

The FIXIT installed on one of our NEW DASH-35 MPU boards:

LINKS
FIXIT installation instructions
FIXIT GAME LIST
Instructions for using the FIXIT as a test fixture.
Instructions for using the FIXIT switch matrix accessory board.
Instructions for using the FREE PLAY programs.
You may also wish to add your own software to the GAMEROM. Each game occupies one of the 128 (2 KB) blocks inside the 27C801 EPROM. Here are the FIXIT ROM maps and binary downloads.

4418 Pack Saddle Pass
Austin, TX 78745
512-447-8888 Voice
512-447-8895 Fax
Sales@Twobits.com